Electrochemical impedance spectroscopy and morphological analyses of pyrrole, phenylpyrrole and methoxyphenylpyrrole on carbon fiber microelectrodes

In this study, N-pyrrole (Py), N-phenylpyrrole (PhPy), and 1[4-methoxyphenyl]-1H-pyrrole (MPhPy) homopolymers were synthesized electrochemically onto carbon fiber microelectrodes (CFMEs). The influences of the substituent effect on electrochemical impedance spectroscopy (EIS) were studied comparatively. All the monomers were electrodeposited in 0.05 M tetraethyl ammonium perchlorate (TEAP)/dichloromethane (CH₂Cl₂) solution and characterized by cyclic voltammetry (CV), Fourier transform infrared reflectance spectrophotometry (FTIR-ATR), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The morphological study reveals that the polymers were deposited as a continuous and well adhered film to surface of the CFME. An equivalent electrical circuit for three different monomers on CFMEs was proposed and experimental data were simulated to obtain the numerical values of circuit components. All results support the high quality film deposition that resulted in desired electronic properties due to the electron donating behaviors of substituent group of phenyl and methoxy.     

The evaluation of a direct injection diesel engine operating with waste cooking oil biodiesel in point of the environmental and enviroeconomic aspects

In this study, the environmental and enviroeconomic analyzes were implemented to the single-cylinder, four-stroke, direct-injection diesel engine operating with diesel fuel, waste cooking oil biodiesel and their blends (B5, B10, B20, and B30) under different fuel injection pressures (170–220 bars) and engine speeds (1000–3200 rpm) and at full load conditions. The environmental and enviroeconomic analyzes results showed that B20 was the worst fuel at the other fuel injection pressures, while diesel fuel was the worst fuel at the original fuel injection pressure. It was determined that B100 gave the best results among the other fuels the entire engine operating conditions.     

A nested iterative scheme for computation of incompressible flows in long domains

We present an effective preconditioning technique for solving the nonsymmetric linear systems encountered in computation of incompressible flows in long domains. The application category we focus on is arterial fluid mechanics. These linear systems are solved using a nested iterative scheme with an outer Richardson scheme and an inner iteration that is handled via a Krylov subspace method. Test computations that demonstrate the robustness of our nested scheme are presented.     

Preparation of PbS thin films: A new electrochemical route for underpotential deposition

Nanostructured thin films of lead sulfide have been synthesized by a new electrochemical approach based on the underpotential deposition (UPD) of Pb and S from the saturated solution of PbS containing excess of PbS particles as a source of Pb²⁺ and S²⁻ at various temperatures.We have demonstrated that this new electrochemical route is a simple method with several advantages, including better control of the growth conditions and a one-step process to obtain the nanostructures of PbS. Scanning probe microscopy studies indicate that the growth of PbS nanofilms follows a two-dimensional layer-by-layer growth kinetics at the beginning of electrodeposition but a three-dimensional growth dominates after the formation of the first few layers. The results of morphological and structural investigations reveal that PbS nanostructures grown by this method are single-crystalline in cubic structure and have a preferential orientation along the [2 0 0] direction. The optical absorption spectra of PbS nanostructures show the blue-shift with respect to those of the bulk counterpart, which are attributed as quantum-size effect.     

Cell‐loss control in multiplexing of VBR video over ATM networks

In this article we investigate the impacts of interspacing and source polling policies on the cell‐loss rates in transmission of variable bit rate video sources over Asynchronous Transfer Mode networks. We present a mathematical model that finds the approximate optimal starting times of the video sources that minimize the congestion at the multiplexer. Combined with the approximate optimal source starting times, we propose a source ordering and polling policy for reducing the cell‐loss rates. The proposed policy is tested against alternative policies using simulation of pre‐recorded video data. This revised version was published online in June 2006 with corrections to the Cover Date.     

PMMA‐multigraft copolymers derived from linseed oil,soybean oil,and linoleic acid: Protein adsorption and bacterial adherence

Synthesis of Poly(methyl methacrylate), PMMA‐multigraft copolymers derived from linseed oil, soybean oil, and linoleic acid PMMA‐g‐polymeric oil/oily acid‐g‐poly(3‐hydroxy alkanoate) (PHA), and their protein adsorption and bacterial adherence have been described. Polymeric oil/oily acid peroxides [polymeric soybean oil peroxide (PSB), polymeric linseed oil peroxide (PLO), and polymeric linoleic acid peroxide (PLina)] initiated the copolymerization of MMA and unsaturated PHA‐soya to yield PMMA–PLO–PHA, PMMA–PSB–PHA, and PMMA–PLina–PHA multigraft copolymers. PMMA–PLina–PHA multigraft copolymers were completely soluble while PMMA–PSB–PHA and PMMA–PLO–PHA multigraft copolymers were partially crosslinked. Crosslinked parts of the PLO‐ and PSB‐multigraft copolymers were isolated by the sol gel analysis and characterized by swelling measurements in CHCl₃. Soluble part of the PLO‐ and PSB‐multigraft copolymers and completely soluble PLina‐multigraft copolymers were obtained and characterized by spectroscopic, thermal, gel permeation chromatography (GPC), and scanning electron microscopy (SEM) techniques. In the mechanical properties of the PHA–PLina–PMMA, the elongation at break is reduced up to ～ 9%, more or less preserving the high stress values at its break point (48%) when compared to PLina‐g‐PMMA. The solvent casting film surfaces were studied by means of adsorption of blood proteins and bacterial adhesion. Insertion of the PHA into the multigraft copolymers caused the dramatic increase in bacterial adhesion on the polymer surfaces. PHA insertion into the graft copolymers also increased the protein adsorption. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Antioxidant and anticholinesterase evaluation of selected Turkish Salvia species

Since Salvia species (Lamiaceae) have been recorded to be used against memory loss in European folk medicine, we herein examined in vitro anticholinesterase and antioxidant activities of 56 extracts prepared with petroleum ether, chloroform, ethyl acetate and methanol obtained from 14 Salvia species (Salvia albimaculata Hedge and Hub, Salvia aucheri Bentham var. canescens Boiss and Heldr, Salvia candidissima Vahl. ssp. occidentalis, Salvia ceratophylla L., Salvia cryptantha Montbret and Bentham, Salvia cyanescens Boiss and Bal., Salvia frigida Boiss, Salvia forskahlei L., Salvia halophilaHedge, Salvia migrostegia Boiss and Bal., Salvia multicaulis Vahl., Salvia sclarea L., Salvia syriaca L., Salvia verticillata L. ssp. amasiaca) growing in Turkey. The antioxidant activities were assessed by both chemical and enzymatic methods against 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging and xanthine/xanthine oxidase (XO) system generated superoxide anion radical inhibition. Anticholinesterase effect of the extracts was tested against both acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) at concentrations of 0.2 and 1 mg/ml using a microplate-reader assay based on the Ellman method. Most of the extracts did not show any activity against AChE at 0.2 mg/ml, while the chloroform extracts had noticeable inhibition against BChE between 47.7% and 74.7%. The most active extracts at 1 mg/ml for AChE inhibition were observed to be petroleum ether extract of Salvia albimaculata (89.4%) and chloroform extract of Salvia cyanescens (80.2%), whereas ethyl acetate extracts of Salvia frigida and Salvia migrostegia, chloroform extracts of Salvia candidissima ssp. occidentalis and Salvia ceratophylla, as well as petroleum ether extract of Salvia cyanescens were found to inhibit potently BChE (92.2%, 89.6%, 91.1%, 91.3%, and 91.8%, respectively). Particularly, the ethyl acetate and methanol extracts were observed to be highly active against both DPPH and XO. Our data indicates that nonpolar extracts of Salvia species for anticholinesterase activity and the polar extracts for antioxidant activity are worth further phytochemical evaluation for identifying their active components.     

Synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone) grafted sodium alginate hydrogel beads for the controlled release of indomethacin

Graft copolymers of sodium alginate (NaAlg) with N‐vinyl‐2‐pyrrolidone were prepared using azobisisobutyronitrile as initiator. The graft copolymers (NaAlg‐g‐PVP) were characterized with Fourier transform infrared spectroscopy, elemental analysis, and differential scanning calorimetry. Polymeric hydrogel beads of NaAlg and NaAlg‐g‐PVP were prepared by crosslinking method using glutaraldehyde (GA) as a crosslinker in the hydrochloric acid catalyst (HCl) and these beads were used to deliver anti‐inflammatory drug, indomethacin (IM). Chemical stability of the IM after encapsulation into beads was confirmed by FTIR. Preparation conditions of the NaAlg‐g‐PVP beads were optimized by considering the percentage entrapment efficiency, particle size, swelling capacity and their release data. In vitro release studies were performed in simulated gastric fluid (pH 1.2) for the initial 2 h, followed by simulated intestinal fluid (pH 7.4) for 4 h. Effects of GA concentration, exposure time to GA, drug/polymer (d/p) ratio, and concentration of HCl on the release of IM were discussed. It was observed that IM release from the beads decreased with increasing GA concentration and exposure time. IM release also decreases with increasing d/p ratio and HCl concentration. The highest IM release was obtained to be 77% for beads crosslinked with 0.027M GA. Swelling experiments were also performed to compute molecular mass between crosslinks of the beads. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

The effect of par‐baking and frozen storage time on the quality of cup cake

The effects of frozen storage and initial baking time of par‐baked cake on baking loss, volume, moisture, colour and textural properties of cake obtained after thawing and rebaking were investigated. Cakes, par‐baked at 175 °C for 15, 20 and 25 min, were stored at ?18 °C for 3, 6 and 9 months. After storage, par‐baked cakes were thawed and rebaked at 175 °C for 10, 15 and 20 min. Baking loss, moisture content, L and +b colour values, firmness, gumminess and chewiness of the resulting full‐baked cakes were significantly affected by both par‐baking and frozen storage time, while specific volume, cohesiveness, springiness and resilience values were significantly affected by frozen storage time. The increase in the time of frozen storage of the par‐baked cake leads to a decrease in the quality of the rebaked cake, namely an increase of baking loss and cake crumb firmness, and a loss in the moisture content and specific volume. Moisture of cake crumb, L and +b colour values, firmness, gumminess and chewiness significantly increased as the par‐baking time increased. However, regarding baking loss, specific volume, moisture content and textural properties, 3‐month intermediate storage at ?18 °C and 20‐min initial baking time gave the best result among the cakes produced by using the two‐step baking procedure.     

彻底的无残留过滤 新型翻袋过滤器式离心机优化性能提升过滤效果

通过将滤布翻转过来的方法将过滤出来的固体物质排出，这一获取高价值过滤材料的基本方法30多年来一直被成功使用，没有改变。然而现在一切似乎都在悄悄地发生着变化，本文所介绍的德国Heinkel公司第三代翻袋过滤器式离心机就印证了这种变化。